4.Quick Start
⑪
Make the instrument to be tilted for ease of operation
⑫
Turn on/off the output of CH1. The backlight will be lighted
when CH1 is tuned on.
⑬
⑭
C H 1/2 button
Switch channel displayed on the screen between CH1 and
CH2.
⑮
Enter DC settings screen of current channel
⑯
Both button Display the editable parameters of both channels. When the
function is enabled, the backlight of the button turns on.
⑰
buttons
Include: Sine , Square , Ramp , Pulse ,
Noise and Arbitrary waveform. When a
waveform is selected, the backlight of the button turns on.
⑱
Turn on/off the generator
Rear Panel
Figure 4-2 Rear panel overview
①
②
output
20MHz reference
input
These two connectors are used to synchronize generators.
The connector [20MHz In] accepts an external 2
clock signal, and the connector [2
2
0 MHz clock signal generated by the crystal inside the
generator. (See P29, "
To Set the Clock Source
③
Through this interface, the generator can be connected to
a PC and controlled via PC software.
④
6
Kommentare zu diesen Handbüchern